Single-ply silicone coated fiberglass, Non-kinking, Designed for temps up to 500 F,Resistant to many oils, solvents, ozone, & alkalis
Made from 316Ti stainless steel, Crush resistant, Corrosion resistant,Excellent flexibility, Temperature range up to 1650 FSingle-ply silicone coated fiberglass,Designed for low & high temps to 550 F,Not recommended for continuous flexing Single-ply silicone coated fiberglass,Outstanding resistance to external abrasion,Extremely flexible & easily compressed Double-ply neoprene coated woven fiberglass,Non kinking, Lightweight, Temps up to 300 F,Not recommended for continuous flexingDouble-ply silicone coated woven fiberglass hose,Narrow pitch allows for tight bending radius, Resistant to many oils, solvents, ozone, & alkalis,Non-kinking, High temps to 550 FDuct hoses offered here are made for the transfer of temperatures above 275º F. The CW-325, a single-ply acrylic coated polyester fabric hose, is a lightweight and flexible duct. It is listed as a UL 94 V-0 flame retardant hose. The CW-325 is perfect for a wide range of applications. The BDS, GS, and CWGS are silicone coated fiberglass fabric duct hoses which can handle temperatures up to 550º F, however, they are limited by their lack of flexibility, although they are perfect for straight runs. The Flex Lok SF also has a similar construction however it is much more flexible and is made for applications which require a flex duct (i.e. hose) for continuous flexing. The Flex Lok SF has up to a ten to one compression ratio, which means a 25 ft. section of the hose can be compressed down to a 2.5 ft. piece and easily stored.
Single-ply aluminum coated silver fiberglass hose extremely flexible and easily compressedHandles up to 1050 F, Intermittent to 1250 
